Monday, 12 November 2018

ELECTRIC POWER STEERING OF A CAR

Electricity systems gain popularity among manufacturers as they provide more refinements and can be adjusted if necessary.


The EPS process contains four basic elements: an EPS management system that collects EPS data and sends the necessary information; EPS, energy and EPS control is managed; the number of items allowing the parties to buy; and complicated, which involves installing the driver into the EPS process.

EPS is driven by a permanent magnetic DC motor and is independent of the motor source, so when the engine is off, there is no steering. The torque sensor has two independent reels. One spool determines whether the right hand and the second spool are determined by the left. The signal is then
sent from the EPS module to the relevant coil that helps the vehicle.


How does electric power change work?

Although the hybrid servo king was used for a long time, we also used an electric motor to drive the hydraulic pump.

All new EPS versions are electronic. This system works through information in the EPS control instrument, EPS engine, retarder, three-torque sensor.

The EPS system cooperates with a key that provides a mechanism of healing by rotating the key. The reduction mechanism is screwed into the tracks, which are attached to the body of the wheel and the lifting mechanism as the hydraulic system, instead of compressing the transmission.

The link mechanism itself is a manual stall with a percussion or electric motor with it. This information is attached to the control memory control unit with the input of the torque sensor in the link-wheel. This system also uses other inputs from the Auto Sensor  and Tractor Control System. These are taken into account when determining the number of requested messages. The control module then shows the motor to rotate the required amount.
A motor-housing sensor is locked to the motor with the machine, the motor gearbox must be turned off and send the data to the EPS control module.


Using an EPS system that works with other sensors, it can provide much more help for any type of ground and vehicle speed.

Power steering modes

• Normal mode - left and right help is provided based on vehicle inputs and speeds. Under normal operating conditions, vehicle speed decreases with increasing vehicle speed.

• Limit Assistance - If there is a problem with returning the information to the EPS control module, the EPS module is a malfunction in the overheated or control area.

• Off - The system shuts down if one of the main components of the EPS is experiencing problems.
Helps with sand. Using an EPS system that works with other sensors, it can provide much more help for any type of ground and vehicle speed.

The EPS is a powerful system which is meaningful to every car owners. We recommend it and there is a great guarantee that the best of steering system will be obtainable. When you talk about efficiency it stands out. Periodical servicing helps to increase its life span.

No comments:

Post a Comment