Wednesday, 31 July 2019

Effects Of Brake Fluid On Car Paint And How To Extract It

Each car manufacturer offers different recommendations on when to change the brake fluid. One can consult the owner's manual or visit a renowned car expert to do the job. Although brake fluid is safe inside an airtight reservoir, sometimes moisture can cause brake fluid to leak and damage the exterior of the car. Leaving the drivers wondering what to do with the brake fluid on the car paint.
As a car owner, you should check the brake fluid level to keep the brake system working well. Brake fluid and

car paint are a terrible combination. An accidental spill on the car paint can mean problems. If you are going to do it alone, pay attention to the information below. An incorrect movement could end up damaging the car's paint.

Let's start by first understanding what effects occur as a result of accidental spilling of brake fluid on the paint.


How does the brake fluid damage the car paint?

You may wonder how brake fluid, an essential component of your car, can damage its shine. The reason is the chemical composition of the liquid, which contains glycol. These molecules perform a double function, which makes the fluid effective in damaging the coatings. The glycol chemical reaction works similarly to an aggressive solvent in car paint.

The fluid breaks the coating layer leaving vertical marks or streaks while moving down on the car's body. The worst case scenario includes brake fluid that is eaten through the car's paint and exposes the metal of the car body. It is one of the effects of the brake fluid on the car's paint situation. 

How long before the fluid causes permanent damage?

Although the car would have no problem, the longer the liquid remains on the paint, the greater the damage it will cause to your vehicle. For those who want to know what the fluid does on the car paint, we have compiled a timeline of the effects of the brake fluid on the car's paint.

  •  5 minutes: opaque marks appear with the coating compromised at those points 
  • At ten minutes, you can see the stains and the damaged paint layer. 
  • 30 minutes: you'll notice streaks, which makes painting damage inevitable

We have the best tips to help you clean the liquid before it damages

Dry the brake fluid

You should use a paper towel to absorb the maximum brake fluid. Do not attempt to clean the liquid, as it will spread and expand the area that may damage. Now, keep the towel in place and press lightly to dry the liquid.

Wash the fluid
Clean the place of the car. Use a car wash detergent to clean the vehicle. Also, use soap to wash, as it is an effective brake fluid paint remover. Be sure to use a clean and damp sponge.


Finally, rinse the area with plenty of water, as it will completely remove the brake fluid and stop the corrosive effects of the paint.
Hope this blog has explained the defect of brake fluid on car's paint and as well highlighted how to remove it.

No comments:

Post a Comment